manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 8 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 8

iv

WARNING

THIS APPARATUS MUST BE EARTHED

IMPORTANT

This equipment is fitted with an approved non-rewireable UK mains plug.
To change the fuse in this type of plug proceed as follows:

1) Remove the fuse cover and old fuse.
2) Fit a new fuse which should be a BS1362  5 Amp A.S.T.A or BSI approved type.
3) Refit the fuse cover.

If the AC mains plug fitted to the lead supplied with this equipment is not suitable for your type of
AC outlet sockets, it should be changed to an AC mains lead, complete with moulded plug, to the
appropriate type.  If this is not possible, the plug should be cut off and a correct one fitted to suit
the AC outlet.  This should be fused at 5 Amps.

If a plug without a fuse is used, the fuse at the distribution board should NOT BE GREATER than 5 Amp.

PLEASE NOTE: THE SEVERED PLUG MUST BE DESTROYED TO AVOID A POSSIBLE

SHOCK HAZARD SHOULD IT BE INSERTED INTO A 13 AMP SOCKET
ELSEWHERE.

The wires in this mains lead are coloured in accordance with the following code:

GREEN and YELLOW —EARTH
BLUE

—NEUTRAL

BROWN

—LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:

The wire which is coloured GREEN and YELLOW must be connected to the terminal which is

marked with the letter E or with the safety earth symbol   or coloured GREEN or coloured
GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with
the letter L or coloured RED.

THIS APPARATUS MUST BE EARTHED

Ensure that all the terminals are securely tightened and no loose strands of wire exist.
Before replacing the plug cover, make certain the cord grip is clamped over the outer sheath of
the lead and not simply over the wires.

6D-En

This equipment conforms to No. 82/499/EEC, 87/308/EEC standard

3A-En

CONFORME AL D.M. 13 APRILE 1989 DIRETTIVA CEE/87/308

3B-It

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments