Akai MPC 3000, Operator'S Manual, Page: 89 / 276

Page 76
Chapter 4: Editing Sequence
• The Loop field:
In this field enter the loop status ( OFF or TO BAR ) and the loop bar
number, if TO BAR is selected, for the initialized sequence.
The “Track” section
• The
Track
field:
Any or all of the sequence’s tracks can be initialized. To enter the
settings for each track, first select the track number in this field,
then enter the initialization data for that track in the fields below.
The contents of the five fields in this section apply only to the track
(1 of 99) that is selected in this field.
• The Status field:
This is a choice field with two options:
1. UNUSED : The track number displayed in the Track field
will not be initialized. Instead, it will be set to an unused
state (as when power is turned on), which requires the
least amount of memory. However, if this track is later
recorded into, it will immediately be initialized to default
values.
2.
IN USE
: The track number displayed in the
Track
field
will be initialized to the values entered in the Type , Pgm
and Chn fields.
• The Type field:
The Type field for the selected track will be initialized to the option
selected in this field ( DRUM or MIDI ).
• The Pgm field:
The
Pgm
field for the selected track will be initialized to the option
selected in this field (1-128 or OFF).
• The
Chn
field:
In this field enter the output MIDI channel (1-16 or OFF) and port
(A-D) to which the selected track will be initialized, using the same
data entry method as in the
Chn field in the Play/Record screen. To
the right of this field is another field for the auxiliary MIDI output
channel assignment.
• The <Do it> soft key:
After values for all the fields have been entered, press this soft key
to initialize the sequence.