manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 7 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 7

iii

WARNING

The MPC3000 is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area.  Please ensure
that your MPC3000 meets the power requirements in your area.  If in doubt, consult
a qualified electrician or Akai Professional dealer.

120V

@60Hz for USA and Canada

220V – 230/240V

@50Hz for Europe

240V

@50Hz for Australia

PROTECTING YOURSELF AND THE MPC3000

•

Never touch the AC plug with wet hands.

•

Always disconnect the MPC3000 from the power supply by pulling on the plug, not
the cord.

•

Allow only an “Akai Professional” dealer or qualified professional engineer to
repair or reassemble the MPC3000.  Apart from voiding the warranty, unautho-
rized engineers might touch live internal parts and receive a serious electric
shock.

•

Do not put, or allow anyone to put any object, especially metal objects, into the
MPC3000.

•

Use only a household AC power source.  Never use a DC power source.

•

If water or any other liquid is spilled into or onto the MPC3000, disconnect the
power, and call your dealer.

•

Make sure that the MPC3000 is well-ventilated, and away from direct sunlight.

•

To avoid damage to internal circuitry, as well as the external finish, keep the
MPC3000 away from sources of direct heat (stoves, radiators, etc.).

•

Avoid using aerosol insecticides, etc. near the MPC3000.  They may damage the
surface, and may ignite.

•

Do not use denaturated alcohol, thinner or similar chemicals to clean the
MPC3000.  They will damage the finish.

•

Place the MPC3000 on a flat and solid surface.

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments