Page 62
DD8
plus Version 2.20 - September 1998
SYSTEM SETTINGS
Pressing the SYSTEM key takes you to the SYSTEM menus. These pages contain parameters
which set up the basic operation of the DD8.
As there are more menus than soft keys, F6 is used as a “MORE” key to scroll through the list of
Menus in groups of five.
In all the SYSTEM menus, soft key EXIT (F6) returns to the previous level.
When you leave the system pages after changing parameters you will see the following screen:
If you don’t want to save your changes, press DON’T SAVE (F5/F6). You can always save your
settings later by going back to the SYSTEM pages and pressing the SAVE soft key.
If you want to save the settings to disk with the current project, select WITH PROJECT (F3/F4).
If you want to save the settings to flash ROM (where they will become the default settings for
new projects created), select FLASH ROM (F1/F2).
DIGITAL SETTINGS
The DIGI key (F1) takes you to the Digital Settings menu :
SAMPLE RATE
Pressing Rate (F1) moves the cursor to the Sample Rate field.
This sets the system’s sample rate. You may select 32kHz, 44.1kHz and
48kHz or any of the associated pull-up and pull-down frequencies (i.e.
44,056Hz):
SYSTEM - 8
