manualshive.com logo in svg

AJA kumo 1604, Installation And Operation Manual, Page: 41 / 73

Share
Download
AJA kumo 1604 Installation And Operation Manual Download Page 41

KUMO SDI Routers and Control Panels v4.7r1 41 www.aja.com

 

Chapter 5 – eMini-Setup

Overview

This chapter describes using the eMini-Setup application to initially communicate 

with and configure the KUMO over a direct USB connection. Once configured, 

the KUMO can be accessed via an Ethernet network using a web browser. 

Subsequently, that device can then be reconfigured over that network, using its 

IP address and built in web server. 

NOTE:  The eMini-Setup application is only used to setup selected Ethernet capable AJA 

devices, and cannot be used to connect to or setup other AJA Mini-Converters.

The general procedure is:
1.  Acquire eMini-Setup from the AJA website and install the eMini-Setup 

application onto a computer.

2.  Connect the KUMO USB port to that computer’s USB port with the supplied 

USB cable.

3.  Launch the eMini-Setup application.
4.  Go to the Network tab where the IP address settings are displayed. You can 

use the existing DHCP assigned IP address, or it can be changed manually.

Acquiring eMini-Setup

AJA’s eMini-Setup application is available for download from the AJA website.
To download the latest eMini-Setup package, which includes the eMini-Setup 

application and documentation: 
1.  Go to:

https://www.aja.com/family/software#eminisetup

2.  Click the link corresponding to the version you want to download for Mac or 

Windows. 

AJA Documentation

Included with the eMini-Setup download is the AJA device's documentation, 

which can be accessed from the eMini-Setup UI via the Help/Manual drop-down 

menu. This manual includes eMini-Setup information.
Documentation can also be accessed directly from the Mac eMini-Setup installer 

in the Documentation folder.
Documentation included with the eMini-Setup application is the version available 

at the time of distribution. However, AJA’s documentation can be updated 

regularly, so newer versions may exist.
To download just the latest documentation, go to:

https://www.aja.com/support

Click the product name and open the Manuals link.

Summary of Contents for kumo 1604










































































Reviews:

No comments