
KUMO SDI Routers and Control Panels v4.7r1 29 www.aja.com
Figure 21. KUMO Network Setup Screen
IMPORTANT: The KUMO Web UI does not automatically update its network data if
something other than that specific browser window is used to change that
KUMO's configuration.
Web Browser Refresh
The following actions can result in the display of inaccurate data in the web
browser:
• Using the factory reset button.
• Using eMini-Setup to change configuration over USB.
• Changing configuration from another browser, or even the same browser in a
different tab.
To workaround this problem, manually refresh the browser window to display the
latest network data.
User Authentication
This parameter enables or disables an authentication login requirement. By
default this parameter is set to Disabled.
When you select
Login
as the User Authentication choice, you then must set and
confirm a password. To save these settings select the
Enable Authentication
button. You can change the password using the NETWORK Screen.
When User Authentication is set to Login, you are directed to the login screen
before you can access KUMO over the network. You are required to log in with a
password before you can access any other KUMO screens.
NOTE: If authentication is used, it provides only a minimum security safeguard against
unauthorized use. The authentication mechanism is simple and does not provide
robust security.
Password Reset
You can use a password reset procedure to set the KUMO device's password back
to the default value, allowing network access to the device if the password should
become lost or mistakenly changed. The default password is "password".
After resetting the password, the current KUMO authentication setting itself is not
changed. If authorization is enabled, after resetting the password you will need to
enter "password" (the default) to gain network access.
KUMO Router Password Reset
1. For a KUMO router, insert a straightened paper clip or similar device into the
reset slot on the rear, hold in for more than eight seconds and then release.