manualshive.com logo in svg

AJA kumo 1604, Installation And Operation Manual, Page: 35 / 73

Share
Download
AJA kumo 1604 Installation And Operation Manual Download Page 35

KUMO SDI Routers and Control Panels v4.7r1 35 www.aja.com

 

IMPORTANT:   The power connector has a latch, similar to an Ethernet connector. Depress 

the latch (facing the outside edge of the KUMO device) before disconnecting the 

power cable from the unit.

Ethernet Connector

An RJ-45 connector provides 10/100/1000 Ethernet connection to the internal 

Linux OS/web server.

Identify LED

The Identify LED lights when you use the web interface to identify the KUMO unit 

you are controlling.  

Button Key Caps

Each control panel button has a removable lens cap that allows you to customize 

Source and Destination names. AJA has provided a template for printing custom 

lens chips (we suggest using 29 lb. vellum) for button designations. The template 

is available at:

https://www.aja.com/support/kumo/lens_chip.zip

Using a Control Panel

Performing a Take

1.  Select the router you wish to control with a Router delegation button. 
2.  Press the desired Destination button. It will illuminate.
3.  Press the desired Source button. That Source will be routed to that 

Destination and the Source button will illuminate. 

NOTE:  Sources for locked Destinations cannot be changed.

Taking a Salvo

Up to eight salvos can be configured on a KUMO router. Each salvo can route any 

number of Sources to any number of Destinations, including the same Source to 

multiple Destinations. Crosspoints not included in a salvo remain unchanged. See 

"Salvos Configuration" on page 26

 to learn how to configure salvos.

Performing a salvo is a two stage process. First you arm the salvo, and then you 

take the salvo.
1.  Press the desired Salvo button. The button will blink for five seconds.
2.  Press that blinking Salvo button again to take that salvo.
After five seconds, the Salvo button will no longer be armed and will stop 

blinking. To take that salvo you will need to press the Salvo button again to rearm 

that salvo. 

NOTE:  Salvos do not change locked Destinations.

Panel Function Button Descriptions

Each KUMO Control Panel provides:

•  Panel Lock – prevents Source or Destination changes from this panel.

Summary of Contents for kumo 1604










































































Reviews:

No comments