manualshive.com logo in svg

AJA kumo 1604, Installation And Operation Manual, Page: 31 / 73

Share
Download
AJA kumo 1604 Installation And Operation Manual Download Page 31

KUMO SDI Routers and Control Panels v4.7r1 31 www.aja.com

 

NOTE:  Depending on your PC or Mac operating system settings, the “.bin” extension 

may not be visible to you in a file directory. 

Uploading and Installing Firmware to KUMO

Uploading and installing the software update only requires a PC or Mac that can 

“see” the KUMO via its browser. Follow this procedure to install the software:
1.  Launch a browser on your PC or Mac and connect to the KUMO product that 

requires a firmware update.

2.  Once the KUMO web page is visible, click on the 

FIRMWARE

 tab.

3.  Then click on the 

Choose File

 button to locate the KUMO firmware image 

file on your PC or Mac.

Figure 23.  KUMO Firmware Screen, Choose File for Firmware

4.  When you have selected a valid KUMO firmware file, click 

Open

 and then 

OK

. The file you select will upload to the KUMO and be tested for validity. 

Incomplete, corrupted, or non-KUMO software files are rejected.

5.  When the upload completes you will be asked if you want to commit the 

firmware to flash. Click 

Commit Uploaded Firmware

. The firmware will be 

loaded to flash. Wait for this to complete.

6.  When done, click the 

Restart

 button to restart your KUMO and refresh the 

web browser and KUMO UI.

Figure 24.  KUMO Firmware Screen, Success and Restart

 

Once these steps are complete, the KUMO will be running the software you just 

uploaded. The configuration of the KUMO prior to the upgrade is preserved. 
Verify the new software is running by bringing up the KUMO web page again. 

Check the Firmware page for the current version number. The restart and refresh 

cycle may take a couple of minutes. If the firmware version does not display the 

new version, perform the update steps again. 

Summary of Contents for kumo 1604










































































Reviews:

No comments