KUMO SDI Routers and Control Panels v4.7r1 37 www.aja.com
Shift/Reset Buttons
The SHIFT SRC and SHIFT DEST buttons serve multiple functions. They allow
you to select shifted Sources and Destinations (17-32 for KUMO CP and 33-64
for KUMO CP2), and they also perform the same reset functions as the reset slot.
Resets should be done only by qualified network personnel:
• Shift: Hold down
SHIFT SRC
and press a Source button to select a shifted
Source, or hold down
SHIFT DEST
and press a Destination button to select a
shifted Destination. When a shift button is not held down, pressing a Source
or Destination button selects the unshifted Source or Destination (1-16 for
KUMO CP or 1-32 for KUMO CP2).
"KUMO Temporary Static IP Address" on page 14
.
• Password Reset: see
.
• Reset to Safeboot Firmware: See
SALVO Buttons (CP2 Only)
The eight Salvo buttons, when configured, can each be used to perform multiple
Source to Destination takes using just that one button.
Performing a salvo is a two stage process. First you arm the salvo, and then you
take the salvo.
1. Press the desired Salvo button. The button will blink for five seconds.
2. Press that blinking Salvo button again to take that salvo.
NOTE: Salvos do not change locked Destinations.
Control Panel Web Browser User Interface
The KUMO CP browser interface provides many of the same Navigation Bar tabs
as the router. This section discusses those functions unique to the control panel
interface.
HOME Screen
Use the HOME Screen to assign a router to each of the router delegation buttons.
Each button has a pulldown menu that lists the active networked KUMOs for
assignment and provides an Unassign and Refresh function.
Figure 30. KUMO CP Browser Interface Home Screen
The assigned router name appears below each button. You can change the
selected (currently-controlled) router on the panel by clicking the button on the
HOME Screen. The panel’s router delegation button will tally appropriately.