KUMO SDI Routers and Control Panels v4.7r1 11 www.aja.com
Chapter 2 – Installation
Overview
KUMO SDI routers are easy to set up and use. All of the steps for KUMO installation
and configuration are documented in this chapter, summarized as follows:
1. Install the chassis in an appropriate rack. If you are mounting multiple
KUMO units, try to place them visually in the same area so if you
communicate with them via a network attached computer, you can use the
KUMO’s Identify feature to flash the corresponding LED of the unit you’re
communicating with. Ensure you have an Ethernet cable routed to where
the KUMO will be placed.
2. Assemble the Ethernet network connections to a closed network or LAN
using Cat 5 Ethernet cable and any required switches and hubs.
3. Connect the KUMO to power, connecting the power cord to mains AC.
4. If necessary, configure device network settings for operation in your facility.
5. Cable the system SDI video Source and Destination equipment and
reference signals.
6. If operating with Dual Link or Quad Link signals, select the appropriate
KUMO operating mode.
Warning! Do not defeat the safety purpose of the grounding-type plug
Caution! To meet safety regulations for leakage current when using redundant
power supplies, connect the KUMO dual power supplies to separate branch circuits
What’s In The Box?
When you unpack your AJA KUMO SDI device, you’ll find the following
components:
• KUMO SDI router or KUMO control panel
• USB adapter cable
• AC adapter and AC power cord
Please save all packaging for shipping KUMO should you wish to do so when
moving or sending it in for service.
KUMO Chassis Installation
Space Requirements
When planning equipment locations and mounting methods, take into account
the size of the chassis. KUMO devices are designed for EIA 19” equipment rack
mounting. See
for exact dimensions of each router
model.