manualshive.com logo in svg

AJA kumo 1604, Installation And Operation Manual, Page: 38 / 73

Share
Download
AJA kumo 1604 Installation And Operation Manual Download Page 38

KUMO SDI Routers and Control Panels v4.7r1 38 www.aja.com

 

CONFIGURATION Screen

Using the CONFIGURATION screen, you can:

•  Adjust the Display Intensity slider – select one of four button illumination 

levels.

•  Reset “Auto Configure” – resets the Auto Configure function to automatically 

set up one control panel to one router. This function re-boots the panel to 

trigger the configuration. Upon reboot, if any other router is found on the 

network, it will not pair to the panel.

•  Reset to Factory Defaults – resets all control panel settings to factory defaults, 

including System Name and Network settings.

Figure 31.  KUMO CP Browser Configuration Screen

 

NOTE:  If a KUMO webpage on a computer is open when that KUMO device is reset or 

had its network configuration changed from another location (even if using a 

different tab in the same browser), the information displayed on that original 

webpage will not be updated automatically and so will display stale data.

BUTTONS Screen

The BUTTONS Screen lets you enable or disable the Source, Destination, and 

Salvo buttons on a KUMO hardware control panel

Disabling Control Panel Buttons

The v4.1 and higher KUMO firmware includes a button disabling feature, useful to 

uniquely configure the button operation of each KUMO CP/CP2 for specific work 

areas and specific workflows. 

NOTE:  This feature is not a router Destination or Source lock. Takes can still be 

performed on paths with disabled buttons, using the KUMO Web UI or another 

KUMO control panel.

The current KUMO CP configuration is retained after a power cycle, including any 

disabled Source or Destination buttons.

NOTE:  Performing a KUMO CP factory reset clears the configuration. All Salvo, Source 

and Destination buttons are enabled after a factory reset.

Procedure 

1.  Access the KUMO CP via its internal web page.
2.  Click on the 

HOME

 tab and select one of the four routers. 

3.  Click on the 

BUTTONS

 tab and then click on the Source, Destination, 

and/or Salvo buttons you wish to disable. Enabled buttons have a green 

background color and disabled buttons have a gray background color.

Summary of Contents for kumo 1604










































































Reviews:

No comments