KUMO SDI Routers and Control Panels v4.7r1 23 www.aja.com
Figure 13. KUMO Web Browser Home Screen (3232 Router)
NOTE: Using the CONFIGURATION tab, you can hide Destination buttons that you do not
want to control from this screen (see
).
Performing a Take
1. Go to the KUMO router HOME Screen and select the router you wish to
control with the drop down menu.
2. Press the desired Destination button. It will illuminate.
3. Press the desired Source button. That Source will be routed to that
Destination and the Source button will illuminate.
NOTE: Sources for locked Destinations cannot be changed.
Taking a Salvo
Up to eight salvos can be configured on a KUMO router. Each salvo can route any
number of Sources to any number of Destinations, including the same Source
to multiple Destinations. Paths not included in a salvo remain unchanged.
Configured Salvo buttons are colored green on the HOME Screen. See
to learn how to configure salvos.
Performing a salvo is a two stage process. First you arm the salvo, and then you
take the salvo.
1. Go to the KUMO router HOME Screen and select the router you wish to
control with the drop down menu.
2. Press the desired configured Salvo button. The TAKE SALVO button on the
right will be colored red.
3. Press the
TAKE SALVO
button. All Sources configured in that salvo will be
routed to their Destinations.
NOTE: Salvos do not change locked Destinations.
Router Configuration
From the Configuration screen you can select the operating mode (Normal, Dual,
Quad), change the Source and Destination names and the colors of the buttons,
and Lock and Hide Destination buttons.