manualshive.com logo in svg

Airwell DLS 30 DCI, Service Manual

Share
Download
Airwell DLS 30 DCI Service Manual Download Page 97

12-22

CONTROL  SYSTEM        

SM DLSDCI 3-A.1 GB

12.5.3.6 EEV correction definition(EEVCV

i

)

The EEV correction value is determined according to the operation mode, 

the actual compressor speed and indoor/outdoor conditions. The correction 

value is targeting towrds optimal behavior of the system.

The following table describes the closed loop control type (EEV correction):

Mode

Main EEV

Cool

• 

Target CTT

• 

Discharge super heat protection

• 

CTT Protection

Heat

• 

Target CTT

• 

Discharge super heat protection

• 

CTT Protection

• 

Sub-cooling (SC) protection

12.5.4 

Outdoor Fan Speed Control

12.5.4.1 General Rules

The OFAN operation keeps the outdoor heat exchanger temperature within predefined values by increasing or 

reducing the OFAN speed. 

Note - Whenever the OFAN speed is abnormal, the OMT and OCT sensors need to be checked.

TROUBLESHOOTING 

Service Manual  
Multi Cinco 100 DCI  

12-29 

Revision 0 

12.5.3 

Outdoor Fan Speed Control 

12.5.3.1

General Rules 

The OFAN operation keeps the outdoor heat exchanger temperature within predefined values by increasing 

or reducing the OFAN speed. Whenever the OFAN speed is abnormal, the OMT and OCT sensors need to be 

checked

.

12.5.3.2

Night mode 

During night mode, the OFAN and the compressor will be limited to lower speeds. 

12.5.3.3

Behavior when there is a failure in OFAN 

Whenever OFAN fault occurs the compressor will be stopped immediately. 

12.5.3.4

Protection Behavior 

OFAN will enter protection speed according to CTT / HST / OMT protection level. Whenever one of these 

protections is entered, OFAN will also speed up/down (Cool/heat) accordingly. 

27 38 

Max (OCT,OMT) 

OFAN Speed Cool mode 

Min 

Max 

OFAN Speed Heat  mode 

Min 

Max 

Min (OCT,OMT) 

8 15 

12.5.4.2 Night mode

During night mode, the OFAN and the compressor will be limited to lower speeds.

12.5.4.3 Behavior when there is a failure in OFAN

Whenever OFAN fault occurs the compressor will be stopped immediately.

12.5.4.4 Protection Behavior

OFAN will enter protection speed according to CTT / HST / OMT protection level. Whenever one of these 

protections is entered, OFAN will also speed up/down (Cool/heat) accordingly.

Summary of Contents for DLS 30 DCI
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands