AirLive POE-GSH1008R-130, User Manual, Page: 82 / 270

4.Web Management: System of POE-GSH1008R-130
AirLive POE-GSH1008R-130 User Manual
78
Parameter description:
Power Supply Configuration
1. Port :
This is the logical port number for this row.
2. Delay Mode :
Turn on / off the power delay function.
Enabled : Enable POE Power Delay.
Disabled : Disable POE Power Delay.
3. Delay Time(0~300sec) :
When rebooting, the PoE port will start to provide power to the PD when it out of
delay time. default: 0, range: 0-300 sec.
4.3.4. PoE Auto Checking Config
This page allows the user to specify the auto detection parameters to check the linking
status between PoE ports and PDs. When it detected the fail connect, will reboot remote
PD automatically.
Web Interface
To Display Power Over Ethernet Device Guard in the web interface:
1. Click Configuration, PoE, and Auto checking.
2. Enable the Ping Check function.
3. Specify the PD’s IP address, checking interval, retry time, failure action and
reboot time.