Home
/
AirLive
/
POE-GSH1008R-130
/
User Manual

AirLive POE-GSH1008R-130, User Manual, Page: 187 / 270

Share

Page: 187 / 270

AirLive POE-GSH1008R-130 User Manual Download Page 187

4.Web Management: System of POE-GSH1008R-130

183

AirLive POE-GSH1008R-130 User Manual

7. Rising Threshold

Rising threshold value.

8. Rising Index

Rising event index.

9. Falling Threshold

Falling threshold value.

10. Falling Index

Falling event index.

4.11.3.3.2.

Status

This page provides an overview of RMON Alarm entries. Each page shows up to 99 entries
from the Alarm table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the
Alarm table. The first displayed will be the one with the lowest ID found in the Alarm table.

The "Start from Control Index" allows the user to select the starting point in the Alarm table.

Clicking the button will update the displayed table starting from that or the next closest
Alarm table match.

The will use the last entry of the currently displayed entry as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.

Web Interface

To configure a RMON Alarm Overview in the web interface:

1. Specify Port which wants to check.

2. Click Security, Switch, RMON ,then Alarm.

3. Checked “Auto-refresh”.

4. Click “ Refresh“ to refresh the port detailed statistics.

«
...
185
186
187
188
189
...
»

Summary of Contents for POE-GSH1008R-130















































































































































































































































































Reviews:

No comments