AirLive POE-GSH1008R-130, User Manual, Page: 79 / 270

4.Web Management: System of POE-GSH1008R-130
75
AirLive POE-GSH1008R-130 User Manual
Parameter description:
Power Supply Configuration
1. Primary Power Supply :
Valid values are in the range 0 to 250 Watts.
2. Port :
This is the logical port number for this row.
Ports that are not PoE-capable are grayed out and thus impossible to configure
PoE for.
3. PoE Mode :
The PoE Mode represents the PoE operating mode for the port.
Disabled : PoE disabled for the port.
PoE : Enables PoE IEEE 802.3af (Class 4 PDs limited to 15.4W)
PoE+ : Enables PoE+ IEEE 802.3at (Class 4 PDs limited to 30W)
4. Priority :
The Priority represents the ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in the case where the remote devices requires more power
than the power supply can deliver. In this case the port with the lowest priority will
be turn off starting from the port with the highest port number.
5. Maximum Power :
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be delivered to a remote device.
The maximum allowed value is 30 W.
6. Buttons
Apply : Click to save changes.
Reset : Click to undo any changes made locally and revert to previously saved
values.
4.3.2. PoE Status
This page allows the user to inspect the current status for all PoE ports.
Web Interface
To Display ECE Statistics in the web interface:
1. Click Monitor, PoE
2. Checked “Auto-refresh”.
3. Click “ Refresh“ to refresh the port detailed statistics.