AirLive POE-GSH1008R-130, User Manual, Page: 124 / 270

4.Web Management: System of POE-GSH1008R-130
AirLive POE-GSH1008R-130 User Manual
120
2. Scroll to select the parameters and write down available value of parameters in
blank field in Basic Settings
3. Evoke to enable or disable the parameters and write down available value of
parameters in blank field in Advanced settings
4. Click the apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will
revert to previously saved values
Parameter description:
1. Multiple Spanning Tree Protocol
2. Force Version :
The STP protocol version setting. Valid values are STP, RSTP and MSTP.
3. Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
4.6.2. MSTP Region Configuration
Along with supporting multiple spanning trees, MSTP also introduces the concept of
regions. A region is a group of devices under the same administrative control and have
similar configuration. In particular, the configuration for the region name, revision, and the
mapping of VLANs to spanning tree instances must be identical on all the network devices
in the region. A digest of this information is included in the BPDUs sent by each device, so
as to allow other devices to verify whether they are in the same region.
Web Interface
To configure the Spanning Tree MSTP Region Config in the web interface:
1. Click Configuration, Spanning Tree, MSTP Region Config
2. Click the save to save the setting
3. If you want to cancel the setting then you need to click the Reset button. It will
revert to previously saved values