AirLive POE-GSH1008R-130 User Manual Download Page 80

Page: 80 / 270

4.Web Management: System of POE-GSH1008R-130

AirLive POE-GSH1008R-130 User Manual

Parameter description:

1. Local Port

This is the logical port number for this row.

2. PD Class

Each PD is classified according to a class that defines the maximum power the PD
will use. The PD Class shows the PDs class.

Five Classes are defined:

Class 0: Max. power 15.4 W

Class 1: Max. power 4.0 W

Class 2: Max. power 7.0 W

Class 3: Max. power 15.4 W

Class 4: Max. power 30.0 W

3. Power Allocated

The Power Allocated shows the amount of power the switch has allocated for the
PD.

4. Power Used

The Power Used shows how much power the PD currently is using.

5. Current Used

The Power Used shows how much current the PD currently is using.

6. Priority

The Priority shows the port's priority configured by the user.

Summary of Contents for POE-GSH1008R-130















































































































































































































































































Search results

Summary of Contents for POE-GSH1008R-130

Reviews:

AirLive POE-GSH1008R-130, User Manual, Page: 80 / 270

Search results

Summary of Contents for POE-GSH1008R-130

Reviews: