manualshive.com logo in svg

AirLive POE-GSH1008R-130, User Manual, Page: 184 / 270

Share
Download
AirLive POE-GSH1008R-130 User Manual Download Page 184

4.Web Management: System of POE-GSH1008R-130

 

 

 

AirLive POE-GSH1008R-130 User Manual 

180 

 

Parameter description: 

1.  History Index 

Indicates the index of History control entry.

 

2.  Sample Index 

Indicates the index of the data entry associated with the control entry.

 

3.  Sample Start 

The value of sysUpTime at the start of the interval over which this sample was 
measured.

 

4.  Drop 

The total number of events in which packets were dropped by the probe due 
to lack of resources.

 

5.  Octets 

The total number of octets of data (including those in bad packets) received 
on the network.

 

6.  Pkts 

The total number of packets (including bad packets, broadcast packets, and 
multicast packets) received.

 

7.  Broadcast 

The total number of good packets received that were directed to the 
broadcast address.

 

8.  Multicast 

The total number of good packets received that were directed to a multicast 
address.

 

Summary of Contents for POE-GSH1008R-130















































































































































































































































































Reviews:

No comments