AirLive POE-GSH1008R-130, User Manual, Page: 100 / 270

4.Web Management: System of POE-GSH1008R-130
AirLive POE-GSH1008R-130 User Manual
96
Web Interface
To Display Group Name to VLAN mapping table configured in the web interface:
1. Click Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Apply.
Figure 4.4.7: The Group Name of VLAN Mapping Table
Parameter description:
1. Delete :
To delete a Group Name to VLAN map entry, check this box. The entry will be
deleted on the switch during the next Save
2. Group Name :
A valid Group Name is a string of atmost 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. whichever Group name you try map to a VLAN must be present in
Protocol to Group mapping table and must not be preused by any other existing
mapping entry on this page.
3. VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges
from 1-4095.
4. Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
5. Adding a New Group to VLAN mapping entry :
Click to add a new entry in mapping table. An empty row is added to the table, the
Group Name, VLAN ID and port members can be configured as needed. Legal
values for a VLAN ID are 1 through 4095. The button can be used to undo the
addition of new entry.
6. Buttons:
Apply – Click to save changes.