AirLive POE-GSH1008R-130 User Manual Download Page 179

Page: 179 / 270

4.Web Management: System of POE-GSH1008R-130

175

AirLive POE-GSH1008R-130 User Manual

3. Data Source

Indicates the port ID which wants to be monitored. If in stacking switch, the value must

add 1000*(switch ID-1), for example, if the port is switch 3 port 5, the value is 2005

4.11.3.1.2.

Status

This section provides an overview of RMON Statistics entries. Each page shows up to

99 entries from the Statistics table, default being 20, selected through the "entries per

page" input field. When first visited, the web page will show the first 20 entries from the

beginning of the Statistics table. The first displayed will be the one with the lowest ID

found in the Statistics table.

The "Start from Control Index" allows the user to select the starting point in the

Statistics table. Clicking the button will update the displayed table starting from that or

the next closest Statistics table match.

The will use the last entry of the currently displayed entry as a basis for the next lookup.

When the end is reached the text "No more entries" is shown in the displayed table.

Use the button to start over.

Web Interface

To configure a RMON Statistics in the web interface:

1. Specify Port which want to check.

2. Click Security, Switch, RMON ,then Statistics.

3. Checked “Auto-refresh”.

4. Click “ Refresh“ to refresh the port detailed statistics.

Summary of Contents for POE-GSH1008R-130















































































































































































































































































Search results

Summary of Contents for POE-GSH1008R-130

Reviews:

AirLive POE-GSH1008R-130, User Manual, Page: 179 / 270

Search results

Summary of Contents for POE-GSH1008R-130

Reviews: