manualshive.com logo in svg

AirLive POE-GSH1008R-130, User Manual, Page: 203 / 270

Share
Download
AirLive POE-GSH1008R-130 User Manual Download Page 203

4.Web Management: System of POE-GSH1008R-130 

 

 

199 

AirLive  POE-GSH1008R-130  User  Manual 

3.  Port State : 

The current state of the port. Refer to NAS Port State  for a description of the 
individual states.   

4.  Last Source : 

The source MAC address carried in the most recently received EAPOL frame for 
EAPOL-based authentication, and the most recently received frame from a new 
client for MAC-based authentication.   

5.  Last ID : 

The user name (supplicant identity) carried in the most recently received 
Response Identity EAPOL frame for EAPOL-based authentication, and the source 
MAC address from the most recently received frame from a new client for 
MAC-based authentication.   

6.  QoS Class : 

QoS Class assigned to the port by the RADIUS server if enabled.   

7.  Port VLAN ID :

 

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is 
not overridden by NAS. 

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is 
appended to the VLAN ID. Read more about RADIUS-assigned VLANs here. 

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. 
Read more about Guest VLANs here. 

8.  Buttons 

 

Auto-refresh: 

Check this box to refresh the page automatically. Automatic refresh 

occurs every 3 seconds. 

Refresh: 

Click to refresh the page.

 

 

4.11.5.  IP Source Guard 
 

4.11.5.1. Configuration 

The section describes to configure the IP Source Guard detail parameters of the 
switch. You could use the IP Source Guard configure to enable or disable with the 
Port of the switch. 

 

Web Interface   

To configure an IP Source Guard Configuration in the web interface: 

 
1.  Select “Enabled” in the Mode of IP Source Guard Configuration. 

Summary of Contents for POE-GSH1008R-130















































































































































































































































































Reviews:

No comments