AirLive POE-GSH1008R-130, User Manual, Page: 32 / 270

4.Web Management: System of POE-GSH1008R-130
AirLive POE-GSH1008R-130 User Manual
28
Enabled: Enable server mode operation.
Disabled: Disable server mode operation.
2. Server Address :
Indicates the IPv4 hosts address of syslog server. If the switch provide DNS
feature, it also can be a host name.
3. Syslog Level :
Indicates what kind of message will send to syslog server. Possible modes are:
Info: Send information, warnings and errors.
Warning: Send warnings and errors.
Error: Send errors.
4. Buttons
These buttons are displayed on the NTP page:
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
4.1.5. LLDP
The switch supports the LLDP. For current information on your switch model, The Link
Layer Discovery Protocol (LLDP) provides a standards-based method for enabling switches
to advertise themselves to adjacent devices and to learn about adjacent LLDP devices. The
Link Layer Discovery Protocol (LLDP) is a vendor-neutral Link Layer protocol in the Internet
Protocol Suite used by network devices for advertising their identity, capabilities, and
neighbors on a IEEE 802 local area network, principally wired Ethernet. The protocol is
formally referred to by the IEEE as Station and Media Access Control Connectivity
Discovery specified in standards document IEEE 802.1AB.
4.1.5.1. LLDP Configuration
You can per port to do the LLDP configuration and the detail parameters, the settings will
take effect immediately. This page allows the user to inspect and configure the current
LLDP port settings.
Web Interface
To configure LLDP:
1. Click LLDP configuration