AirLive POE-200CAM V2 User Manual Download Page 94

Page: 94 / 117

AirLive

POE200CAMv2

User’s

Manual

【

Step 4

】

Playing Playback Group.

The system will playback all recordings shown in

the query result window. During the multiple

playback, double clicking any screen will switch

the display to single channel mode. The playback

can be controlled with the following.

Playback Control.

Back to the starting hour

Play

Rewind

Stop

Playback speed control:

The system supports five playback speeds. The

default speed is normal. Move the slider toward

“slow” will slow down the playback. Move the slider

toward fast will increase the playback speed.

Playback Control:

Use the pointer in the control area to operate the

video.

Summary of Contents for POE-200CAM V2






















































































































Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands

AirLive POE-200CAM V2, User Manual

Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands