AirLive POE-200CAM V2 User Manual Download Page 71

Page: 71 / 117

AirLive

POE

‐

200CAMv2

User’s

Manual

Remove Image

Remove all the configuration of a selected camera image.

Image Alarm

Activate Alarm Action

【

Step1

】

Start Alarm Action

Select the Image icon of a LanCam/Video Server in

the System Setup area, and click Alarm Action button

from the Menu Bar to bring up the Alarm

Action window.

【

Step2

】

Select the Alarm Activation Type

It is disabled by default you can change to “Always” to

turn it on, or “Schedule” to activate it per schedule

defined in Schedule Setting.

【

Step3

】

The “Holiday” Option

“Holiday” check box only works with Schedule, you may click to check “Holiday” to activate alarm action full day

during holiday, regardless the scheduled time in previous setting. The holiday is also user-definable. (Please refer

to Section 7.4.3.2 Holiday Setting)

【

Step4

】

The “Alarm Interval”

Configure the number of seconds between alarms. If successive alarm occurred during this interval, it will be

ignored. The total seconds of pre-alarm and post-alarm are suggested to be the minimum of alarm interval.

【

Step5

】

Click “Add”… to add new Alarm Action.(Detail please refers to Section 7.6.8.1.2 LanCam Setting –

Image Alarm)

【

Step6

】

Click

“

OK” to save all alarm action configuration (including “Add”, “Modify”, “Remove” and “Copy”) and

dismiss this window. Click “Cancel” to ignore all configurations and dismiss this window.

Summary of Contents for POE-200CAM V2






















































































































Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands

AirLive POE-200CAM V2, User Manual

Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands