AirLive POE-200CAM V2 User Manual Download Page 90

Page: 90 / 117

AirLive

POE200CAMv2

User’s

Manual

7.7 Multi Playback

Multi Playback is a program designed for quickly accessing and searching multiple schedule recording files.

Since this program will consume a large amount of memory and CPU time, it is strongly recommended that

this program only run on a remote computer, not on the server itself.

7.7.1 Running Multi Playback Program

【

Step1

】

Select Start/All Programs/AirLive CamPro Express/ Multi playback.

【

Step2

】

System Log on window.

If this is the first time you login, use Administrator as

default user name and leave the password blank,

then click OK to log into the system.

Server Location:

“127.0.0.1” is the default for local

server. If you want to access from client PC, then

please enter the IP of server PC to this field.

【

Note

】

Password: It is recommended that you

change this default password, for user restriction

please go to User Group section to change the

password.

Summary of Contents for POE-200CAM V2






















































































































Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands

AirLive POE-200CAM V2, User Manual

Search results

Summary of Contents for POE-200CAM V2

Reviews:

Related manuals for POE-200CAM V2

Brands by name

Popular brands