manualshive.com logo in svg

Air Live POE-FSH2422G-250, User Manual, Page: 5 / 51

Share
Download
Air Live POE-FSH2422G-250 User Manual Download Page 5

Table of Contents 

AirLive POE-FSH2422G User’s Manual 

 

iv

4.14 Bandwidth Control (Port Management menu) ....................................................26

 

4.15 Broadcast Storm Control (Port Management menu) ..........................................27

 

4.16 POE (Port Management menu)..........................................................................28

 

4.17 VLAN Setting......................................................................................................28

 

4.18 VLAN Mode (VLAN Setting) ...............................................................................29

 

4.19 VLAN Member (VLAN Setting)...........................................................................30

 

4.20 Multi to 1 Setting (VLAN Setting)........................................................................31

 

4.21 Per Port Counter ................................................................................................32

 

4.22 Trunking .............................................................................................................32

 

4.23 QoS Setting........................................................................................................33

 

4.24 Priority Mode (QoS Setting) ...............................................................................34

 

4.25 Port, 802.1p, IP/DS based (QoS Setting) ...........................................................34

 

4.26 TCP/UDP Port Based (QoS Setting) ..................................................................35

 

4.27 Security ..............................................................................................................35

 

4.28 MAC Address Binding (QoS Setting)..................................................................35

 

4.29 TCP/UDP Filter (QoS Setting) ............................................................................36

 

4.30 Spanning Tree ....................................................................................................37

 

4.31 STP Bridge Settings (QoS Setting) ....................................................................38

 

4.32 STP Port Settings (QoS Setting) ........................................................................39

 

4.33 Loopback Detection Settings (QoS Setting) .......................................................40

 

4.34 Backup/Recovery ...............................................................................................40

 

4.35 Miscellaneous ....................................................................................................41

 

4.36 SNMP.................................................................................................................41

 

4.37 Logout ................................................................................................................42

 

Appendix A:  Product Specifications

...............................................................43

 

Appendix B:  Troubleshooting

.......................................................................45

 

Summary of Contents for POE-FSH2422G-250




















































Reviews:

No comments