manualshive.com logo in svg

Air Live POE-FSH2422G-250, User Manual, Page: 46 / 51

Share
Download
Air Live POE-FSH2422G-250 User Manual Download Page 46

4. Web Management 

 
 
 
 
 

 

AirLive POE-FSH2422G-250 User’s Manual 

 

41

4.35 Miscellaneous 

Miscellaneous setting is used to configure output queue aging time, VLAN stride and IGMP 

snooping. 

 

 

„

  Output queue aging: This function is used to avoid the poor utilization of the switch. 

When a packet is stored in a switch for a long time, it will expire from the allowable time 

defined by the protocol and become a useless packet. To prevent these packets from 

wasting the bandwidth, this switch provide an option for the administrator to enable the 

queue aging function. 

„

  VLAN Striding: By selecting this function, the switch will forward uni-cast packets to the 

destination port, no matter whether destination port is in the same VLAN. 

„

  IGMP Snooping: When this function is enabled, the switch will execute IGMP snooping 

version 1 and version 2 without the intervention of CPU. The IGMP report and leave 

packets are automatically handled by the switch. 

 

4.36 SNMP 

Simple Network Management Protocol is a set of protocols for managing complex networks. 

The SNMP network contains 3 key elements: managed devices, agents, and 

network-management systems (NMSs). Managed devices are network devices that content 

SNMP agents. SNMP agents are programs that reside SNMP capable device's firmware to 

provide SNMP configuration service.    The NMS typically is a PC based software such as 

HP Openview that can view and manage SNMP network device remotely.     

 

Summary of Contents for POE-FSH2422G-250




















































Reviews:

No comments