manualshive.com logo in svg

Air Live POE-FSH2422G-250, User Manual, Page: 36 / 51

Share
Download
Air Live POE-FSH2422G-250 User Manual Download Page 36

4. Web Management 

 
 
 
 
 

 

AirLive POE-FSH2422G-250 User’s Manual 

 

31

to define and configure your VLAN groups. Since you want 

e handover to other switches take place smoothly, the VLAN IDs (Numbers) need to be 

ke on the rest of your network. On other switches you may have the chance to configure 

mportant! 

 

 

 will be displayed at the bottom of the 

creen. 

ort 

PC is now sending out data, with PVID you define if that data is for group 100 or 

01. 

VLAN Member in Tag Based Mode 

In Tag Based Mode you need 

th

li

names. These are just for your reference. Only the numbers are i

There firstly add your VLAN Groups (identified throughout your network by unique and 

constant numbers). Start with IDs from 100 and up. Keep in mind that some switches use 

“1” as the default, while others use “4095” or “4096” as default. Starting with 100 gives you

enough free room and less compatibility issues. 

 

So enter “100” in the field right of VID Setting, then select or deselect which ports are 

member of that group. Your up- and downlink ports need to member of every existing group!

Then click on add. The new group with its setting

s

 

With the PVID Setting you define to which VLAN group incoming traffic belongs. Consider 

the example that Port 1 is member of group 100 and 101. A simple PC is connected to P

1. If that 

1

 

4.20 Multi to 1 Setting (VLAN Setting) 

 

Multi to 1 VLAN is used in CPE side of Ethernet-to-the-Home and is exclusive to VLAN 

r Setting is updated, multi to 1 

luded 

in this setting. All ports excluded in this setting are treated as the same VLAN group. In a 

setting on VLAN Member Setting. When VLAN membe

setting will be void and vice versa. The disable port means the port which will be exc

normal Tag Based VLAN network you will not need this configuration option. 

 

Summary of Contents for POE-FSH2422G-250




















































Reviews:

No comments