manualshive.com logo in svg

Air Live POE-FSH2422G-250, User Manual, Page: 38 / 51

Share
Download
Air Live POE-FSH2422G-250 User Manual Download Page 38

4. Web Management 

 
 
 
 
 

 

AirLive POE-FSH2422G-250 User’s Manual 

 

33

 

 

4.23 QoS Setting   

Here you can configure QoS policy priority mode and CoS (Class of Service) configuration. 

QoS (Quality of Service) refers to mechanisms in the network software that make the actual 

determination of which packets have priority. CoS refers to feature sets, or groups of 

services, that are assigned to users based on company policy. If a feature set includes 

priority transmission, then CoS winds up being implemented in QoS functions within the 

routers and switches in the network. In an enterprise network, class of service (CoS) 

differentiates high-priority traffic from lower-priority traffic. Tags may be added to the 

packets to identify such classes, but they do not guarantee delivery as do quality of service 

implemented in the network devices. 

 

(QoS) functions, which are 

There are many management functions can be set or performed if you click the 

QoS Setting on Home Page, including:   

 

„

 Priority 

Mode 

„

  Port, 802.1p, IP/DS based 

„

  TCP/UDP Port Based 

In the following sessions, we will talk in detail about the management functions under the 

QoS Setting menu. 

Summary of Contents for POE-FSH2422G-250




















































Reviews:

No comments