- 7 -
2.4.0. GUARANTEE AND LIABILITY
NEW TOOL AND ACCESSORY WARRANTY
Any new tool or accessory branded with the AIMCO, Uryu, AcraDyne
or Eagle Industries name, and purchased from AIMCO, or through one
of its authorized distributors or agents, is warranted to the original buyer
against defects in materials and workmanship for a period of one (1)
year* from date of delivery. Under the terms of this warranty, AIMCO
will repair or replace any product or accessory warranted hereunder
and returned freight prepaid proving to AIMCO’s satisfaction to be
defective as a result of workmanship or materials. In order to qualify for
this warranty, written notice to AIMCO must be given immediately upon
discovery of such defect, at which time AIMCO will issue an authorization
to return the tool. The defective item must be promptly returned to an
authorized AIMCO service center with all freight charges prepaid.
REPAIRED TOOL WARRANTY
Once a tool is beyond the new product warranty period as detailed
above, AIMCO repairs are subject to the following warranty periods:
pneumatic tools: 90 days*; electric tools and Acra-Feed: 90 days;
battery tools: 30 days*; DC Electric tools: 90 days*
EXCLUSION FROM WARRANTY
This warranty is valid only on products purchased from AIMCO,
or thru its authorized distributors or agents. AIMCO shall have no
obligation pursuant to the AIMCO Warranty with respect to any tools
or accessories which in AIMCO’s sole judgment have been altered,
damaged, misused, abused, badly worn, lost or improperly maintained.
This Warranty is null and void if the customer, or any other person other
than an authorized representative of AIMCO, has made any attempt
to service or modify the tool or accessory prior to its return to AIMCO
under this Warranty.
Any other use beyond this is not considered proper intended use.
AIMCO is
not
liable for any damages resulting from non-compliance.
2.3.0. IMPROPER USE
AIMCO is not liable for damages and operational errors that result from
non-compliance with these operating instructions or improper use.
The tool is not a torque wrench. This tool cannot be
used for already tightened connections because very
high reaction torques can cause the motor control and
the motor to overheat.
