- 17 -
After pressing the trigger, the LED and the barcode scanner will switch
on. The afterrun illumination of the LED after the trigger has been
pressed can be defined in the AcraDyne Tool Manager under Settings
- General. The released barcode scanner goes off after a barcode is
successfully scanned and/or the trigger has been released.
Do not clean the LED with aggressive cleaning agents!
4.1.4. MULTI-COLOR LED CONTROL LIGHT
The AcraDyne cordless series
has a LED control function that is
near the display and spans the
circumference of the tool. The
light indicates tool status:
The time-length of the light can
be programmed as glowing,
flashing, or pulsating for each LED
signal.
More information about LED
Control Light programming can
be found in the AcraDyne Tool
Manager manual.
The optional barcode scanner musut be activated
in the hardware settings of AcraDyne Tool Manager
software.
Color Indicator:
Screwdriver is released
Tool is on reverse mode;
counter-clockwise rotation
Tightening was successful
(OK)
Error at tightening (NOK)
Tool needs acknowledgement
of the result or action of the
worker
