- 12 -
e) Take good care of the power tool.
Check that moving parts work
properly and do not jam, that there are no broken or damaged
parts, and that the functionality is not hindered. Have damaged
parts repaired prior to using the device. Many accidents are
caused by poorly maintained power tools.
f) Keep the tools clean.
Carefully maintained tools jam less often and
are easier to use.
g) Use the tool, accessories, etc. in accordance with these instructions.
Take the working conditions and task to be executed into
account. The use of power tools for other purposes than the
intended use can lead to hazardous situations.
h) Use the right tool.
Do not use low-output tools for heavy loads. Do
not use the tool for purposes and work for which it is not intended.
i) Check your tool for damage.
Prior to further use of the tool, the
safety equipment or damaged parts must be inspected to ensure
proper functionality.
Check to ensure the functionality of moving parts, that they don’t
jam, that no parts are broken, and that all parts are properly and
correctly installed and all conditions required for the operation of
the device have been fulfilled.
Damaged safety equipment and parts should be properly repaired
or replaced by trained and qualified personnel
unless otherwise
indicated in the operating instructions. Damaged switches must be
replaced by trained and qualified personnel.
Do not use tools on
which the trigger cannot be easily switched on and off.
3.4.5. SERVICE
Only allow your power tool to be repaired by a
qualified technician using only original
spare parts,
available from AIMCO. This ensures that the safety of
your device is maintained.
3.5.0. LITHIUM-ION BATTERY
Please make sure to follow the following instructions
for using lithium-ion batteries.
