- 22 -
5. DISPLAY
Tool serial number
or program number
of the active
program.
Function display:
green: connected
yellow: searching for
connection
red: no connection
Display elements can be modified in AcraDyne Tool Manager so the
worker is shown, for instance, precise values for the fastener joints,
rotational angle, only an OK or NOK, or the counting process. You can
set in which unit the values are output (Nm, lbf.in, lbf.ft).
Main display window
The main display window shows the results of the fastening process,
warnings, commands, symbols, and texts to make controlling the tool
easier. The worker always knows immediately whether the work was
correct, which torque range is specified for the next fastener joint, or
why the tool is not executing a fastening process. Furthermore, the
worker is notified by the integrated battery management system that
the battery needs to be changed before it can be damaged due to
deep discharging.
Counting
function:
Counts the
processed
fasteners per
fastening
instance e.g.
01/02 means
1 fastener of
2 successfully
fastened.
Battery
display:
Shows 5
different
charging
statuses
Torque
Angle in degrees
Status description
