- 16 -
Before you remove the battery or install it on the
tool, please check that the rotating direction switch
is in the neutral position. Always check the rotating
direction switch prior to operation.
4.1.2. ROTATING DIRECTION SWITCH
To change the rotating direction, the tool is equipped with a rotating
direction switch.
• Only use the rotating direction switch after the tool has come to a
complete stop. Changing the rotating direction during operation
damages the device.
• If you are not using the tool, set the rotating direction switch to the
neutral position.
• To change or set the direction, press the rotating direction switch
out to the left for
clockwise rotation
out to the right for
counter-clockwise rotation
If the rotating direction switch is set to the center position, the trigger
cannot be activated.
4.1.3. LED / BARCODE SCANNER
Never look directly at the LED or barcode scanner!
Rotating
direction
switch
Rotating
direction
switch
