- 18 -
RISK OF INJURY
If a low torque is expected and a very high torque is
set unintentionally.
For the
CTA Series
, the tool will be programmed with AcraDyne
Tool Manager software. Make sure that the tool is configured and
parameterized correctly. See the AcraDyne Tool Manager user
manual for operating instructions.
4.2.0. SETTING THE TIGHTENING TORQUE
For the
MTA and MCA Series
, the tightening torque is adjusted with a
mechanical clutch.
To adjust the clutch, the protective
covering needs to slide open.
1) Carefully press down the rear of
the covering.
2) The clip will easily slide backward.
3) The clutch will be visible. Now the
clutch can be adjusted with a
torque adjustment tool.
– counter-clockwise: lower torque
– clockwise: higher torque
After the adjustment, slide the
cover back into its initial position. It
will close and lock automatically.
Check the torque with a torque
measurement unit. If the requested
value isn´t reached, adjust the
clutch again.
1
2
3
Clutch
adjustment
If you want to execute a job later or you have
scanned the wrong barcode, you can cancel
this after the release.
To do this, hold down the display button for
approx. 3 seconds. The cancel symbol will
appear. Confirm this by pressing the left side
display button.
4.3.0. CANCEL JOB
