- 15 -
4. START-UP
Do not let the tool fall or allow other objects to fall on the device.
Protect it from impact damage. Make sure that the device does not
come into contact with sprayed water or oil.
• To remove the battery, set the
rotational direction switch to the
center position, slide the clip on the
front side of the battery back, and
pull it forward away from the tool.
• To install the battery, align the tongue
of the battery
with the groove in the
casing so it can easily slide into place.
• Always slide it on completely until
it locks with a click. Check that the
battery is correctly locked in place
before starting to work.
If the battery is not installed properly, it can fall out of the tool and
lead to injuries.
•
Never use force when installing the
battery. If the battery
cannot be easily slide in, it has not been correctly installed.
1 – Clip
2 – Remove battery
2
1
4.1.0. INSTALLING OR REMOVING THE BATTERY
4.1.1. TRIGGER
Trigger
Trigger
