- 6 -
2. GENERAL INFORMATION
2.1.0. IMPORTANCE OF THE OPERATING INSTRUCTIONS
This information was written with the intention of being read, understood
and complied with in all points by persons responsible for the operation
of the AIMCO tool.
Prior to start-up, please read the operating instructions and comply
with the safety instructions. Work station faults can only be prevented
if the contents of these operating instructions are known and fault-free
operation can be ensured.
We are not liable for damages and operational errors that result from
non-compliance with these operating instructions. If difficulties arise ,
please contact us and we will gladly provide assistance.
2.2.0. PROPER INTENDED USE
The tool may only be used, as described in these instructions, to create
fastener joints suitable for the type of tool.
Proper intended use also includes:
• complying with all of the the operating instructions
• complying with inspection and maintenance work.
Before you put the tool down, wait until it has come to
a complete stop; otherwise, the tool can jam and you
may lose control of the tool.
1. IMPORTANT INFORMATION
When tightening and loosening fasteners, high reaction
torques can occur. Therefore, always keep a tight grip
on the tool.
Switch the electrical device off immediately if the
tool used locks up and be prepared for high reaction
torques that can cause kickback. The tool locks up
when it is overloaded or jams in the workpiece.
