74
Save
The save operation allows the current instrument set-up to be saved to a local set-up store. Save
will function with or without an attached USB flash drive.
To perform a save operation first select the set-up store for the current instrument state to be saved
to.
Pressing the
Save
soft-key will show a screen similar to that below.
The name offered will be the same as the name in the selected set-up store when the
Save
soft-
key was pressed. The Edit Box shows the name of the file that will be saved and the soft-key labels.
KNOB and cursor keys allow the name to be edited.
The
DelChar
key allows characters to be deleted from either end of the name but not from the
centre.
The
Default
soft-key displays the name of the source file again.
The
Cancel
key cancels the save operation and returns to the top level Stores menu.
The
Execute
soft-key starts the save operation and returns to the top level Stores menu when
complete.
The cursor keys will move the edit cursor through the name and turning the KNOB will cycle
through all valid characters, numbers and symbols.
Recall
The recall operation allows the current instrument set-up to be replaced with the set-up from a local
store. Recall will function with or without an attached USB flash drive.
To perform a recall operation first select the set-up store containing the instrument state to recall.
Pressing the
Recall
soft-key will then recall the data and load it as the current instrument set-up.
Delete
The delete operation allows the set-up in the selected store to be deleted. The store will then be
marked empty.
Operations on Waveform Files
To operate with waveforms ensure that the waveform files are shown by pressing the
Wave
soft-
key.
