50
Sweep Type
To set the sweep type press the
Type
soft-key. The currently selected type will appear in the Edit
Box and soft-keys will change to a list of sweep types available.
The
soft-key indicates that there are too many options to show all at once so press this key to
show more. In this case there is one more list of types.
One more press of the
soft-key will show the first list again. Select the sweep type required by
pressing the appropriate key then press the
Done
soft-key to return to the top level Sweep menu.
The arrows indicate up or down or up/down sweeps. With any of the
Lin
types selected the
sweep changes the frequency at a linear rate; with
log
types selected the sweep spends an
equal time in each frequency decade.
The up arrows indicate a sweep from start frequency to stop frequency. The down arrows indicate a
sweep from stop frequency to start frequency.
Start and Stop Frequency
To set the start or stop frequency press the
Start
or
Stop
soft-keys. The frequency parameter
will appear in the Edit Box and the sweep waveform type in the Graph Box will show that start or
stop frequency is being edited.
The frequencies may be changed in either of the ways detailed in General: Numeric Editing.
The start frequency must be lower than the stop frequency, if this is not the case an error will be
generated.
