27
Pulse Delay
Pressing the
Delay
soft-key shows the delay parameter in the Edit Box and the Graph Box
changes to show that delay is being edited.
The delay may be changed in either of the ways detailed in General: Numeric Editing.
Changing the delay causes the start of the pulse to be delayed with respect to the
carrier
sync
pulse available at the SYNC OUT connector. The delay also adds a delay between the trigger signal
and the pulse output during burst and gate modes. See the Burst section for more details of Burst
and Gate modes. The delay also changes the relative timings of the pulses in dual channel modes.
Rise Time and Fall Time
Pressing the
Edge
soft-key shows the edge parameter in the Edit Box and the Graph Box
changes to show that edge is being edited. The soft-keys also change to present more options for
editing the edge times of the pulse.
The selected edge time may be changed in either of the ways detailed in General: Numeric Editing.
There are three ways to adjust the edge times:
1.
Couple
:
The edges are changed together.
2.
Rise
:
Only the Rising edge is changed.
3.
Fall
:
Only the falling edge is changed.
If
Rise
or
Fall
are selected the soft keys will change as shown below.
