71
The files are listed by name and the number indicates the size of the file in bytes for a set-up file or
the number of points in a waveform file.
There are nine local set-up stores and four local arbitrary waveform stores. The respective lists
always show all of the stores even if they are empty. An empty store shows
Empty
instead of a
size.
Press the STORES key to exit from the stores menu.
Selections
The first soft-key selects between waveforms and set-ups. When Waveforms are shown the key will
be labelled
Setup
and when set-ups are shown the key will be labelled
Wave
.
The second soft-key selects between local and disk. When the selection arrow is in the
Local:
Box the key will be labelled
Disk
and when the selection arrow is in the
Disk:
Box the key will
be labelled
Local
.
The file selection arrows are moved by first selecting the required box, as above. A file is then
selected by turning the KNOB until the selection arrow is next to the required filename. If there are
more files than will fit on the screen the list will scroll when the arrow reaches the top or bottom of
the box.
Operations on Set-up Files
To operate with set-ups ensure that the set-up files are shown by pressing the
Setup
soft-key.
There are nine local set-up stores numbered
1
to
9
. The number is shown next to the filename in
the
Local:
Box. Initially the files will all be empty. The file names are
SETUP1
to
SETUP9
by
default but they may be changed as they are used.
There are four operations available for set-up files as shown by the soft-key labels
Copy
,
Save
,
Recall
and
Delete
. The copy operation will not be available if no flash drive is attached.
