ahlmann AS 210, Operating Instructions Manual

Page: 37 / 116

S220/S221/S230/S231/Z200 5-5
Operation 5
Before driving on public roads, the following road safety
measures must be taken:
5.2.3.1 Carrying a bucket
(1) Lower the bucket arm until the lowest point of the
bucket arm or the bucket is at least 30 cm above the road
(5-4).
(2) Close the ball block valve for the working and auxiliary
hydraulics (4-8/2).
CAUTION
When closed, the ball block valve is perpendicular
to the flow direction. This prevents the bucket arm
from being lowered accidentally and the bucket
from tipping accidentally while driving.
(3) Block the swivel unit by inserting the blocking wedge
(1-3/arrow) into the swivel block (1-4/arrow) and secure it
with the spring locking lever.
(4) Cover the bucket cutting edge and teeth with the
bucket protector (5-4/arrow).
(5) Insert the plug of the bucket protector into the socket
(5-5/arrow, option).
(6) Perform a function check.
(7) Lock both doors.
(8) Put on the safety belt.
(9) Switch the switching lever for the steering to the „rear-
wheel steering“ position (4-8/3).
DANGER
The working lights (4-12/7) must be switched off.
(10) Release the parking brake (4-9/7).
(11) Switch to gear stage “II” (4-9/1).
(12) Select the travel direction (4-9/5).
(13) Press the accelerator pedal (4-7/3).
DANGER
Changing the travel direction during driving is not
allowed to avoid any danger to other road users.
NOTE
Changing from gear stage 2 to stage 1 occurs
only after the speed equals or drops below the
permissible (defined) speed.
If the speed is higher than the permissible (defined)
speed when the gear change occurs, the display
of the selected gear stage (4-5/5) starts to flash
(the selected gear stage does not engage while
the display is flashing).
Figure 5-5
Figure 5-4
i