ahlmann AS 210, Operating Instructions Manual

Page: 17 / 116

S220/S221/S230/S231/Z200 1-11
Safety Regulations 1
1.6.4 Oil, grease and other chemical
substances
1.6.4.1 The relevant safety regulations must be observed
when handling oil, grease or other chemical substances.
1.6.4.2 Caution when working with hot fuel and other
accessory materials (danger of burning and scalding).
1.6.4.3 Caution when working with brake fluid and battery
acid.
TOXIC AND CAUSTIC!
1.6.4.4 Be careful when working with fuel.
FIRE HAZARD!
- Before refuelling, switch off the engine and remove the
ignition key.
- Do not refuel in an enclosed area.
- Never refuel near open fires or sparks.
- Do not smoke during refuelling.
- Immediately wipe up spilled fuel.
- Keep the machine free of fuel, oil and grease.
1.6.5 Gas, dust, steam, smoke
1.6.5.1 The machine may be operated in closed rooms
only if sufficient ventilation is ensured! Ensure sufficient
ventilation prior to starting the machine!
The regulations for the respective working site must be
strictly observed.
1.6.5.2 Carry out welding, burning and grinding work on
the machine only when this is explicitly approved. Other-
wise, there is the danger of fire and explosion!
1.6.5.3 Before carrying out welding, burning and grinding
work, clean the machine and its vicinity of combustibles
and make sure that the room is adequately ventilated.
Explosion hazard!
1.7 Transport and towing;
recommissioning
1.7.1 The machine may only be towed if the brakes and
steering function.
1.7.2 Towing may be carried out only by means of an
adequately dimensioned towing bar in connection with
towing devices.
1.7.3 Start towing at a low speed. Persons must not be
near the towing bar.