ahlmann AS 210, Operating Instructions Manual

Page: 34 / 116

S220/S221/S230/S231/Z200 5-2
5 Operation
5 Operation
Figures and descriptions may vary due to modifications in
the construction that become possible and necessary to
improve the loader and to develop it further technically.
These modifications are summarised in section 13.
5.1 Checks before start-up
- Engine oil level (see the operating instructions for the
engine)
- Hydraulic oil level
- Fuel level
- Tyre pressure
- Profile depth
- Battery fluid level
- Lighting system
- Mirror positioning
- Seat position
- Swivel unit safeguard (1-4/arrow); remove if necessary
» only if work is to be commenced «
- Bucket arm prop [(e.g. bucket arm supports (option)
(1-1/arrows)]; remove if necessary
- Ball block valve for the working and auxiliary hydraulics
(1-2/arrow); open if necessary
» only if work is to be commenced «
- General state of the loader, e.g. check for leaks
- The presence of
- a fist aid kit
- a warning triangle
- a signal lamp
must be verified.
5.2 Commissioning
5.2.1 Starting the diesel engine
(1) Engage the parking brake lever (4-9/7).
(2) Insert the battery main switch (8-21/2).
NOTE
The vehicle is ready for operation after eight
seconds.
(3) Set the drive switch (4-9/5) to “0” (starter interlock!).
(4) Insert the ignition key into the starter switch (4-7/5)
and turn the key clockwise to position “I” (5-1).
NOTE
The indicator lamps for battery charge, parking
brake and engine oil pressure light up. The fuel
level and coolant temperature instruments
function.
(5) Turn the ignition key clockwise to position „III“. As
soon as the engine starts, release the ignition key.
Figure 5-1
i
i