Version May 2021
EN
17
agru SP 63 mobile
V 3
User’s Manual
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str. 31
4540 Bad Hall, Austria
ucts. A product is a parameter set of technical welding param-
eters either in memory ex works or defined by the user (see
Sect. 4.5 for reference); one of the parameters of the set is the
material of the component. In user-defined parameter sets, the
product name is at the user’s discretion. If one product has sev-
eral thermoplastic materials for which welding parameters exist
in memomry, after selecting that product the user is prompted
to select the material used in the upcoming welding operation.
If there is only one material for it, the machine moves on to
the diameter selection screen, just as after the selection of a
material rather than a product on the first selection screen.
To select a product or a component material, touch the appropriate button
on the screen. Analogous screens will follow that allow selecting, for the
component that is going to be welded, its diameter, its wall thickness,
and its SDR value. After every selection made, the machine switches to
the next selection screen.
Standard products/materials can be selected on those screens. Further-
more, the machine enables the jointing of additional products/mateirals,
i. e., additional parameter sets of characteristic welding data which are
either defined as additional parameter sets ex works before the machine
ships or set up by the user themselves (see Sect. 4.5).
Additional parameter sets are under an access code that has to be en-
tered and confirmed by touching the
button, as soon as they are
accessed using the additional-parameter button
. To whom this code
is disclosed is at the machine operator’s discretion.
The Product/Material or Material selection screens will always be show,
even if there is only one material or product in memory. All other selec-
tion screen appear only when a selection is actually possible. If, e. g.,
there is only one diameter in memory for a given material, no diameter
selection screen will be displayed.
Important
The machine must never be used to weld pipe materials, diam-
eters, and thicknesses other than those available in the welding
parameter screens. The manufacturer is in no circumstances
liable for damage or consequential damage that occurs as a
result of deviations from these pipe data or of modifications or
attempted modifications to the control software. Furthermore,
this will cancel any claims to warranty expressed for the ma-
chine. To make a material available in this screen, it has to be
entered previously with all its technical welding parameters in
the configuration menu.
4.4 Entering Traceability Data for the Joint
On the screens that allow changing the techni-
cal parameters for the upcoming welding opera-
tion, by touching the
button, it is possible
to access the traceability data for the joint and
change them as needed (see Display 6).
Independently of accessing them by touching
the
key, the welder identification code has
to entered after switching the machine on (see
Sect. 4.1 and Display 2), as no welding operation
is allowed without a valid welder code.
The machine displays a menu that allows selecting the traceability
information to be changed (see Display 6). You can confirm all cur-
Display 6
