Agilent Technologies G7104A, User Manual

Page: 208 / 234

208 Agilent 1290 Infinity II Flexible Pump User Manual
11
LAN Configuration
Automatic configuration with Bootp
5
Make these entries for the instrument:
•
MAC address
• Host name, Enter a Hostname of your choice.
The Host Name must begin with "alpha" characters (i.e. LC1260)
•
IP address
• Comment (optional)
•
Subnet mask
•
Gateway address (optional)
The configuration information entered is saved in the Tab File.
6
Click
OK
.
7
Leave
Edit BootP Addresses
by pressing
Close
.
8 Exit BootP Settings by pressing OK .
9
After each modification of the BootP settings (i.e. EditBootPSettings) a
stop or start of the BootP service is required for the BootP service to
accept changes. See
“Stopping the Agilent BootP Service” on page 209
or “Restarting the Agilent BootP Service” on page 210.
10
Power cycle the Instrument.
OR
If you changed the IP address, power cycle the instrument for the
changes to take effect.
11
Use the PING utility to verify connectivity by opening a command
window and typing:
Ping 192.168.254.11 for example.
The Tab File is located at
C:\Documents and Settings\All Users\Application Data\Agilent\BootP\TabFile