Error Messages
145
Appendix C
Error Messages
Error Types
Table C-2 lists the error messages generated by the Agilent E8462A Relay
Multiplexer module firmware when programmed by SCPI. Errors with
negative values are governed by the SCPI standard and are categorized in
Table C-1. Error numbers with positive values are not governed by the SCPI
standard.
"Table C-2. Multiplexer Error Messages" appears in its entirety on the
following page.
Table C-1. Error Types Described
Number
Range
Error Types Description
-199 to -100
Command Errors (syntax and parameter errors). See the
Agilent
E1405/E1406 Command Module User's Manual
for a description of
these errors.
-299 to -200
Execution Errors (instrument driver detected errors). See the
Agilent
E1405/E1406 Command Module User's Manual
for further details.
-399 to -300
Device Specific Errors (instrument driver errors that are not command
nor execution errors). See the
Agilent E1405/E1406 Command Module
User's Manual
for further details.
-499 to -400
Query Errors (problem in querying an instrument). See the
Agilent
E1405/E1406 Command Module User's Manual
for description of
these errors.
Summary of Contents for E8462A
