Agilent Technologies E8462A, User Manual

Page: 13 / 156

Configuring the Agilent E8462A Multiplexer 11
Chapter 1
Configuring the Agilent E8462A
Multiplexer
Using This Chapter
This chapter provides general module information, vital WARNINGS and
CAUTIONS, and the tasks you must perform to configure and install the
Agilent E8462A Relay Multiplexer. It also provides information to verify
module installation. Chapter contents are:
•
Module Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11
•
Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
•
Configuring the Multiplexer Module . . . . . . . . . . . . . . . . . . Page 15
•
Installing the Multiplexer in a Mainframe . . . . . . . . . . . . . . Page 17
•
Connecting Field Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
•
Terminal Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24
•
Programming the Multiplexer . . . . . . . . . . . . . . . . . . . . . . . . Page 29
•
Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32
Module Description
Figure 1-1 shows the Agilent E8462A armature relay multiplexer simplified
block diagram, Option 014 or 015 Terminal Card, and a simple measure-
ment application. Notice the sixteen 100

protection resistors; one in series
with each bank line. Refer to Figure 1-1 for the following description.
Relay Organization
The 256 channels of the E8462A Relay Multiplexer are organized into eight
banks with 32 channels per bank. The channels in each bank are as follows:
The default configuration is 128 channels of 2-wire switches (128 x 2).
Bank Channels
0 000 - 015 and 032 - 047
1 016 - 031 and 048 - 063
2 064 - 079 and 096 - 111
3 080 - 095 and 112 - 127
4 128 - 143 and 160 - 175
5 144 - 159 and 176 - 191
6 192 - 207 and 224 - 239
7 208 - 223 and 240 - 255