128
Chapter 3
VEE Measurement Program Operation
Measurement
and the adjacent track (i.e, squeezing
track).See measurement definitions on
Chapter 4.
OTRC Write Pos.
Specifies the distance where the write data
track is written. (not the same as squeezing
track). This distance is expressed as
percentage of the write width. See
measurement definitions on Chapter 4.
Function
Select the parameter to be profiled as either
TAA or Narrow Band TAA.
Meas. Type
Specifies the type of measurement sequence.
1)[Erase Write Meas.] means to perform a
band erase, write a specified data then
measure the parameter. 2)[Write Meas.] means
to write a data, then measure. 3) [Meas.]
means to measure only.
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
5. Click the [Interpolation Setup] button to open the Interpolation Setup menu.
Figure 3-72
Interpolation Setup Menu
Use Best Fit Window
Specifies the use of best fit window. If
checked, the specified window size (%) will
be shifted between the high and low
thresholds in order to get the best correlation
to plot the interpolation lines. If unchecked,
the high and low threshold settings will be
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
